-40%
o2 Oxygen Lambda Sensor Eliminator Set Plug Kawasaki KLX250 S/SF EFI 2006 - 2017

o2 Oxygen Lambda Sensor Eliminator Set Plug Kawasaki KLX250 S/SF EFI 2006 - 2017

$ 9.27

Availability: 13 in stock
  • Refund will be given as: Money Back
  • Restocking Fee: No
  • To fit model: ZX14R 06-12
  • Item must be returned within: 30 Days
  • Country/Region of Manufacture: United Kingdom
  • Return shipping will be paid by: Buyer
  • Manufacturer Part Number: 02-KM4P
  • Condition: New
  • Returns Accepted: Returns Accepted
  • Brand: Redline Superbikes
  • Part Manufacturer: Redline Superbikes
  • To Fit Make: Kawasaki

    Description

    Welcome to the Official Redline Superbikes eBay Store
    Shop Categories
    OXYGEN SENSOR ELIMINATORS
    SUZUKI DEALER MODE SWITCH
    HISS PROGRAMMING TOOL
    STEERING DAMPER ELIMINATORS
    O2 BLANKING PLUG M12X1.25
    O2 BLANKING PLUG M18x1.5
    SIDE STAND SWITCH BYPASS PLUG
    Helpful Links
    Add to Favourite Sellers
    Sign up to Newsletter
    View Feedback
    Visit eBay Shop
    o2 Oxygen Lambda Sensor Eliminator Set Plug Kawasaki KLX250 S/SF EFI 2006 - 2017
    Item Description
    You will receive one o2 eliminator and one stainless steel M12 blanking plug as pictured
    Improved throttle response, smoother power delivery
    Supports FI mods such as Power Commander and other mods that require the elimination of the o2 sensor
    Cheaper than replacing a faulty o2 sensor
    Simple to fit, No cutting or soldering required
    Please note
    that it is best practice to completely remove the O2 sensor from the exhaust and fit a blanking plug in its place.
    How Does An o2 Eliminator Work
    The O2 sensor which is installed in the stock exhaust systems of motorcycles are used by the Manufacturer to adjust the fuelling in order to pass the emission tests for street homologation.
    This is done only in a very limited RPM range under certain load situations. The intention behind it is not to improve the performance of the machine. It's aimed to reduce the emissions of the engine in the specific RPM/Load situations which are tested during the homologation process.
    This can result in delayed throttle response or unsteady power delivery. If you replace your silencer or exhaust system or fuelling, it's suggested to remove the installed sensor and replace it with this eliminator.
    The eliminator simulates the signal given from the O2 sensor under optimal A/F ratio conditions. This allows the bike to run under best performance conditions.
    If you install an aftermarket exhaust, remove the catalyst, install a power commander or perform similar modifications we strongly suggest installation of an O2 sensor eliminator for the best performance of your machine.
    Fitting
    Fitting your o2 eliminator couldnt be easier.
    Step 1. Locate your wiring from the o2 sensor.
    Step 2. Un-clip the o2 sensor wiring connection from the main wiring loom.
    Step 3. Clip the o2 eliminator into the wiring connection on the main wiring loom.
    If you need any further assistance just contact me
    Quality Assurance
    At Redline Superbikes we pride ourselves on quality and customer service. Our products are produced with the best components available and all come with a 14 day unconditional money back guarantee. In the unlikely event that your item is damaged or malfunctioning it will be replaced at no expense to you.
    Products that do not satisfy the customer can be returned within 14 days for a full refund.
    Copyright Redline Superbikes
    o2 Oxygen Lambda Sensor Eliminator Set Plug Kawasaki KLX250 S/SF EFI 2006 - 2017